The right sealer, applied the right way, to protect marble, granite, travertine, limestone and slate from stains and moisture.
Natural stone is full of tiny pores. Sealing fills them below the surface so oil, wine, coffee and water have a harder time soaking in. It is not a force field: no sealer makes stone stain-proof or etch-proof, but a good one buys you time to wipe up spills and keeps moisture out of the stone and the grout. Stones differ widely in porosity, so a sealer that is right for dense granite may be wrong for open travertine.
We begin by cleaning the stone and testing porosity. Then we choose a sealer for the stone type, finish and location, such as a penetrating sealer for countertops, an enhancing sealer for slate or a product designed for showers and outdoor use. We apply it in controlled coats, remove excess before it cures and cure it properly. We label the product and date so you know when to renew, and give you a simple water drop test to check the seal between visits. We seal grout lines too, since they are often the weak link.
We test the stone so the sealer fits how porous it really is.
Counters, floors, showers and patios each need a different type of sealer.
Careful application prevents hazy, sticky or uneven results.
You get the product name and date, plus a way to test the seal later.
Drag the handle to compare.
BeforeAfterMore time to wipe up.
Fit the sealer.
Your choice.
Stone and grout.
Know when to renew.
Not stain-proof.
Every topic has its own page with what to expect and how we approach it.
Grout and tile guideMarble and Natural StoneMarble, travertine, granite, limestone and slate are beautiful and sensitive. Here is how to care for each.Learn more 
Home situationKitchens and BacksplashesCooking oil, spills and constant wiping take a toll on kitchen grout. Here is how to keep floors…Learn more 
Home situationBathrooms and ShowersSteam, soap and minerals make bathrooms the hardest place for grout. Here is how to keep showers clean…Learn more Pick a room, traffic and water type to get a care schedule for cleaning, sealing and caulk.
You tell us about your tile and what bothers you, stained grout, a moldy shower or a dull floor, and we set a visit that fits your day.
We look closely at tile, grout and caulk, tap-test floors, probe suspicious spots, test cleaners in a hidden area and take photos of anything of note.
We explain your options for cleaning, recoloring, sealing or regrouting, bring grout color samples and give you a written scope with clear timing and pricing.
We protect floors, cabinets and fixtures, set up dust control and remove old grout or caulk where the plan calls for it.
We deep clean, repair, regrout, recolor or seal with the right products for each surface and clean the tile as we work.
We clean up, walk the room with you and leave simple care and cure instructions and a reminder for your next check.
Most does, though dense stones need it less. We test to know.
No. Etching is a chemical reaction with acids, and sealers do not stop it.
Drop water on the stone. If it darkens and soaks in within a few minutes, it is time to reseal.
It is possible, but prep and technique matter and mistakes are hard to fix. A pro is safer for valuable stone.
Penetrating sealers do not. We avoid topical finishes on floors.
Tile SealingSealers matched to your tile type that protect porous tile and stone from stains, moisture and daily wear.Explore 
Granite Polishing and SealingDull granite counters and floors cleaned, polished and sealed so the stone shines and resists stains.Explore 
Grout SealingA penetrating sealer that keeps spills, soap and dirt out of porous grout so lines stay cleaner for…Explore 
Natural Stone CleaningDeep, pH-safe cleaning for marble, granite, travertine, limestone and slate that restores color without harming the surface.Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
